Toyana HK3516 needle tumbler bearings

f0:15.6; Fatigue limit load, Cu:1.79 kN; Da max:118.5 mm; da max:89.3 mm; Dynamic load, C:47.1 kN; d1:89.3 mm; D1:115.3 mm; Characteristic outer ring frequency, BPF0:6.08 Hz; B:22 mm; Brand:SNR;

d:70; Unit, Type:Insert Bearing Unit; Days to Ship:Quote; Grease Type:Standard Grease; Surface Treatment:No; Unit Body Material:Cast Iron; Unit Body Material:Cast Iron; Stroke:No; Stroke:No; Rolling Element Material:Bearing Steel;

d:19.05 mm; Designation of housing:PE204N-; Weight:0.57 kg; s1:15.5 mm; C:12.8 kN; B:31 mm; T max.:100 °C; Z:15.3 mm; A1:19 mm; G:R1/8";

Inch - Metric:Metric; Weight / Kilogram:0.028; ra max:0.3 mm; Category:Single Row Ball Bear; Snap Ring:No; Nlim (grease):13,000 rpm; Min operating temperature, Tmin:-25 °C; Category:Single Row Ball Bear; Radial clearance class:CN; Noun:Bearing;

C:29.6 kN; Recommended tightening torque for set screw:8 Nm; H:49.2 mm; J:88.9 mm; Weight:1.83 kg; E:15 mm; T min.:-40 °C; H1:13 mm; H2:99 mm; A:47 mm;

Basic Load Rating Cor (Static)(N):15300; Bearing Inner Dia. Shape:Set Screw; Bearing Inner Dia. Shape:Set Screw; Surface Treatment:Not Provided; Volume Discount:Available; Unit, Type:Ball Bearing Units; RoHS:6; Unit, Type:Ball Bearing Units; Material Bearing:52100 Bearing Steel; Unit Body Material:C

Shape:T-Shaped; Bearing Material:[Steel] Steel; Bearing Retained:No; Days to Ship:8 Days; Bearing I.D. d(mm):25; Type:Bearings with Housin; Height H(mm):40 ～ 80; Number of Bearings:Double; Thickness, Height Indication:T Selection, h Confi; Bearing Used:Deep Groove Ball Bea;

Bearing Retained:No; Number of Bearings:Double; Bearing Retained:No; Lateral Width L(mm):74; Bearing Used:Deep Groove Ball Bea; Bearing Material:[Steel] Steel; Height H(mm):50 ～ 80; Bearing I.D. d(mm):30; Thickness, Height Indication:T, h Selection; Type:Bearings with Housin;

Machining:No; Bearing Unit, Type:Diamond Flange Shape; H(mm):95; Basic Load Rating Cor(KN):5.8; Unit, Type:Insert Bearing Unit; Unit, Type:Insert Bearing Unit; Stroke:No; Fit:J7; Shaft Dia. (mm)(φ):25; Unit Body Material:Cast Iron;

Outer Ring:With Outer Ring; Contact angle(Degree):40; D:62; Type symbol:No; Special Configurations Code:No; O.D.(Ø):62; Specifications/Environment:Standard; Preload Mark:No; Size Standards:Metric System; Inner/Outer Ring Material:Steel;

m:12 mm; G:7/16-20UNF; S:33.3 mm; SW:5.56 mm; Weight:2.13 kg; D:130 mm; C0:49.5 kN; d:76.2 mm; T min.:-20 °C; r:2;

r1a max:3.3 mm; Characteristic inner ring frequency, BPFI:14.7 Hz; a:26.3 mm; d:73.02 mm; Characteristic cage frequency, FTF:0.46 Hz; Characteristic outer ring frequency, BPF0:12.3 Hz; D:112.71 mm; ra max:3.5 mm; Mass:0.87 kg; C:19.05 mm;

L1:60 mm; Designation of bearing:EX307-23G2L3; S:18.3 mm; T min.:-20 °C; J:160 mm; H1:20 mm; G:M6x1; B:38.1 mm; H:56 mm; Recommended tightening torque for set screw:8 Nm;

H1:15 mm; Designation of housing:PG205N-; H:36.5 mm; A1:25 mm; A:38 mm; Recommended tightening torque for set screw:3.7 Nm; C0:7.88 kN; d:22.22 mm; L1:25 mm; H2:70 mm;

Radial clearance class:C3; Static load, C0:55 kN; rs min:1.1 mm; f0:16.1; Mass:1.16 kg; Brand:NTN; Characteristic outer ring frequency, BPF0:11.16 Hz; ra max:1 mm; Min operating temperature, Tmin:-60 °C; Dynamic load, C:47.5 kN;