SKF FYTBK 20 FE bearing units

Fillet Radius rb:0.30 mm; B:26.00 mm; D:85.0000 mm; Basic Static Radial Load Rating Co:45500 N; Grease Speed Rating n1:6000 rpm; Oil Speed Rating n2:7200 rpm; d:60.000 mm; Fillet Radius ra:1.00 mm; Basic Dynamic Radial Load Rating C:39000 N;

L:610 mm; da:200 mm; J6:560 mm; Q180°:900 kN; P90°:1600 kN; Ca:130 mm; Oil level, max.:68 mm; H2:85 mm; s:10 mm; End cover:ETS 3044 R;

Reference speed:28000 r/min; Mass needle roller and cage assembly:0.0016 kg; Ew:13 mm; Basic dynamic load rating C:4.57 kN; Fatigue load limit Pu:0.63 kN; U:10 mm; Fw:10 mm; Limiting speed:32000 r/min; Basic static load rating C0:5.7 kN;

Basic Dynamic Radial Load Rating C:12500 N; Oil Speed Rating Open/Shielded n2:7500 rpm; Grease Speed Rating Open/Shielded n1:6300 rpm; B:10.00 mm; Sealed Speed Rating n3:4000 rpm; Basic Static Radial Load Rating Co:12900 N; Fillet Radius ra:0.60 mm; Accessories:Two Seals; d:75.000 mm; D:95.0000 mm;

Initial grease fill:382.73 g; P90°:113 kN; P150°:68.1 kN; Da:240 mm; ba:59.531 mm; H2:60.325 mm; PG:1/4 NPT; Max. speed for Taconite seal:560 r/min; Housing:SAF 032 KA; Bearing:23032 CCK/W33;

Sealed Speed Rating n3:6300 rpm; B:30.20 mm; Basic Static Radial Load Rating Co:43000 N; Oil Speed Rating n2:8500 rpm; Grease Speed Rating n1:6300 rpm; Accessories:No Shield, no Seal,; d:30.000 mm; Basic Dynamic Radial Load Rating C:46800 N; D:72.0000 mm; Fillet Radius ra:1.00 mm;

Da max.:670 mm; K:12 mm; Basic static load rating C0:11000 kN; D:680 mm; b:22.3 mm; B:225 mm; Limiting speed:900 r/min; d:500 mm; Mass bearing:250 kg; Fatigue load limit Pu:880 kN;

Mass adapter sleeve assembly:3.45 kg; d1:107.95 mm; B1:112 mm; G:M 120x2; B:26 mm; d:120 mm; Hydraulic nut:HMV 24 E; d3:155 mm; Lock nut:KMFE 24;

Oil Speed Rating n2:4500 rpm; D:200.0000 mm; Grease Speed Rating n1:3300 rpm; Basic Static Radial Load Rating Co:360000 N; Fillet Radius rb:1.00 mm; B:90.00 mm; Basic Dynamic Radial Load Rating C:325000 N; Fillet Radius ra:2.50 mm; d:95.000 mm;

Sleeve:S 36x6.3/8; Hydraulic nut:HMVC 36E; d:180 mm; Lock washer:W 36; G:179.476 mm; Threads per inch:8; Lock nut:AN 36; B:28.042 mm; B1:127.711 mm; d1:161.925 mm;

B2:26.5 mm; d:110 mm; d1 ≈:155.75 mm; r3,4 min.:3 mm; B1:14 mm; Mass angle ring:1.25 kg;

Basic Dynamic Radial Load Rating C:22900 N; Accessories:No Shield, no Seal,; Oil Speed Rating n2:11000 rpm; Fillet Radius ra:1.00 mm; Basic Static Radial Load Rating Co:21200 N; Grease Speed Rating n1:8000 rpm; Sealed Speed Rating n3:8000 rpm; D:52.0000 mm; d:25.000 mm; B:22.20 mm;

d1:135 mm; b:13.9 mm; Calculation factor Y0:2.5; ra max.:2.5 mm; Limiting speed:3000 r/min; B:73 mm; Calculation factor e:0.26; Basic static load rating C0:1080 kN; Calculation factor Y2:3.9; K:7.5 mm;

Limiting speed:3200 r/min; Fatigue load limit Pu:81.5 kN; Da max.:214 mm; s1 max.:8.7 mm; ra max.:2 mm; d:150 mm; Mass bearing:8.45 kg; Da min.:198 mm; r1,2 min.:2.1 mm; Basic static load rating C0:850 kN;

J max.:368.3 mm; da:103.188 mm; Max. speed for PosiTrac Plus seal:1350 r/min; PosiTrac Plus contact element:2 x B10724-113; Mass pillow block:47.2 kg; R1:79.375 mm; Cap bolt:2 x 1-8 UNC; L:419.1 mm; A2:187.325 mm; PG:1/4 NPT;